Products

IFF: Decoder OX5001

Target Corporation has designed and developed the latest generation Decoder Group for use with Mark X and Mark XII (SIF) Interrogator Systems. This decoder builds upon the best features of its predecessors by providing the most processing power yet available in a manual, all digital decoder, while keeping volume and power dissipation to a minimum. The OX-5001/UPX Decoder Group consists of the KY-5035/UPX Video Decoder, the ID-5087/UPX Intratarget Data Indicator and the MX-5182/UPX Radar Target Light Gun.

The Video Decoder provides selective identification by passive decoding of all codes on Modes 1, 2, 3/A, B and D with any interlace pattern on each of four separate channels. A unique symbol is settable for each of the four decode channels. Communication failure (7600 emergency), civil emergency (7700 emergency), military emergeney (4X emergency) and a user definable emergency (such as 7500 HIJACK) are automatically decoded and displayed on the PPI with special designations. An audible and visual alarm is also provided. In addition an optional remote alarm monitor may be used.

A Selected Altitude Layer (SAL) feature is provided to decode and filter aircraft replies in specific altitude layers (whose upper and lower limits are settable in 100 foot increments).

The Decoder also provides for PPI display of I/P decode, X pulse decode, all bracket display, raw video display and Mode C bracket display. Display size is automatically controlled by either the front panel Range Scale switch or the PPI range switch eliminating the need to reset internal adjustments when the PPI range is changed.

The Intratarget Data Indicator allows for active readout of a target selected by the Radar Target Light Gun on any two modes. Mode C replies are converted from hybrid-gray code. All Mode C replies below a settable transition altitude, are corrected for local barometric pressure which is operator programmable in inches of mercury. The corrected altitude is displayed on the digital readout and is also used in SAL determination.

Automatic Altitude Tracking is provided. A Mode C reply which correlates with a selected passive decode on channel 1, within ±300 ns is presented for display on the Data Indicator and is updated for every antenna rotation.

The Video Decoder contains a built-in, self-test generator. Sufficient inputs are provided to enable operation with virtually any beacon interrogator system which complies with the provisions of ICAO, Annex 10.

The Video Decoder contains spare card slots, spare connectors and provides the necessary output signals to allow for future expansion. Additional decoding channels can be added through an expansion feature.

	AN/UPA-59	AN/UPA-59A	OX-5001/UPX
Digital Delay Line	NO	YES	YES
4 Channels Passive Decode	NO	NO	YES
Active Readout	YES	YES	YES
Passive Decode Channel Symbols	NO	NO	YES
Modes Band D Capability	NO	NO	YES
Emergency Decoding	YES	YES	YES
User Definable Emergency Decoding	NO	NO	YES
Transformer Isolated Power Supply	NO	YES	YES
Display Output Range Compensation	NO	NO	YES
Internal Emergency Alarm	NO	NO	YES
100 Foot SAI Increments	NO	NO	YES
Automatic Tracking	NO	NO	YES
Pressure/Altitude Correction	NO	NO	YES
Active Mode Indication	NO	NO	YES
Garble Sensing	YES	YES	YES
Garble Indicator	NO	NO	YES
l/P Decoding	YES	YES	YES

SPECIFICATIONS

KY5035/UPX DECODER

INPUT POWER
115, 220V-single phase
50, 60, 400HZ 120 watts

SIGNAL INPUTS
Tagged Video Amplitude 2-5 volts
Impedance 75 ohms

RADAR TRIGGER
Amplitude 2-20 volts
Impedance 75 ohms

ACTIVE GATE TRIGGER
Amplitude 2-5 volts

SIGNAL OUTPUTS
Display Video (2) 2-6 volts, adjustable into
75 ohms
Parallel Code Video Framing pulses: F1, F2
Code: A, B, C, D,
I/P Decode
Bracket Decode
Mode Gates
4 volts, TTL compatible

PHYSICAL CHARACTERISTICS
Size 6.5"W x 15"H x 19"D
Weight 38 Ibs.

ENVIRONMENT
Operating Temp. - 25°C to +55°C
Storage Temp. -55°C to + 125°C

MTBF
4,300 hrs.

ID 5087/UPX DATA INDICATOR

INPUT POWER
Supplied by decoder, approx. 10 watts

SIGNAL INPUTS
TTL compatible
Data Bits
Control Signals

SIGNAL OUTPUTS
Light Pulse +4 volts, TTL compatible

PHYSICAL CHARACTERISTICS
Size 6.0"W x 3.0"H x 11.45"D
Weight 3 Ibs.

MTBF
35,400 hrs.

MOUNTING PROVISION
4 #6-32 holes on bottom of unit

MX 5l82/UPX LIGHT 6UN

INPUT POWER
+12V, - 12V@ 100mA supplied by ID-5087

WEIGHT
3 oz.

MTBF
100,000 hrs.

8400 Lakeview Parkway, Suite 200
Pleasant Prairie, WI 53158
262-947-8400
Fax 262-947-8403

info@targetcorporation.com